Showing posts with label Error codes. Show all posts
Showing posts with label Error codes. Show all posts

Friday, October 2, 2009

Cause a blue screen with error code (3)



Cause a blue screen with error code (3)

Good evening

Still, the Hang in the end so far!

bluescreen

Error code Stop 0 × 00000050 or PAGE_FAULT_IN_NONPAGED_AREA

     Cause

        1. Occur in the absence of the requested data memory
        2. Occurred during the installation of software compatibility problems
        3. Faulty memory (system memory, L2 cache memory, video memory)

     [Address]

        1. After deleting the wrong driver, reinstall the updated drivers
        2. もし、ベンダードライバを探せなかった場合、同じベンダーの他のドライバでインストール挑戦!

Error code Stop 0 × 00000051 REGISTRY_ERROR

     Cause

        1. Registry-related errors, or configuration management
        2. File system for hardware problems or occur during read and write registry file IO error
        3. Memory management error
        4. If you ask a computer resource limits again in trouble

     [Address]

        1. ERD (emergency recovery disk) is present, restoration of the normal state registry
        2. After installing the new hardware when you Restart the computer, reboot your PC again to remove the hardware from
        3. Check the compatibility of hardware and drivers
        4. For more information about the hardware to the hardware!
        5. At the time of the reboot, F8 and select the last successful configuration press
        6. Restore registry system restore

Error code Stop 0 × 0000005A: CRITICAL_SERVICE_FAILED

     Cause

        1. When the last successful boot configuration, Windows errors are not running for essential services

     [Address]

        1. After removing the hardware attached to the last reboot
        2. Check or hardware compatibility problem
        3. Memory Dump Analysis and find the equipment that caused the (good work !-_-;;)

Error code Stop 0 × 00000076: PROCESS_HAS_LOCKED_PAGES

     Cause

        1. The IO device driver after the operation, LOCKED error that occurred was not clear the page

     [Address]

        1. The latest version of service pack (sp) installation

Error code Stop 0 × 00000077 or KERNEL_STACK_INPAGE_ERROR

     Cause

        1. Paged memory (tentative) or kernel file from the requested page of data is read from memory, if not found errors (L2 cache easy to say bad!)
        2. Collisions disk errors or virus infection by

     [Address]

        1. CHKDSK / F to conduct, 0xC0000185 at, SCSI bus connector, or use the Controller to determine IRQ

Error code Stop 0 × 0000007A or KERNEL_DATA_INPAGE_ ERROR

     Cause

        1. In the page file can not load the kernel for memory探Senaku data errors

     [Address]

        1. Bad disk damaged disk controller drivers, BIOS, verify hardware problems

Error code Stop 0 × 0000007B or INACCESSIBLE_BOOT_DEVICE

     Cause

        1. If you can not access the system partition during the boot
        2. Installing incorrect device driver, or update due
        3. Errors due to virus infection

     [Address]

        1. IO determine if an incorrect device drivers and system controller
        2. If you do not recognize the boot device and file system data, recovery from the recovery console
        3. Add disk, repartitioning, when you update the disk controller, boot.ini has been changed if the information Butomaneja, boot.ini file to edit, to edit or Butomanejaparameta
        4. To update the firmware and driver

Error code Stop 0 × 0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

     Cause

        1. Windows creates the wrong thread, this error occurs when (a clear cause is unknown)

     [Address]

        1. Hardware compatibility, device driver that is damaged, inspection services or systems, viral infections, such as software inspection (check all -_-;;)

So far, so today there are other things to do from now

So, good night!

Cause a blue screen with error code (2)



Cause a blue screen with error code (2)

Is still yesterday. Yet, the end is far away. (T.T)

bluescreen

Error code Stop 0 × 00000023: FAT_FILE_SYSTEM

     Cause

        1. FAT to read or write errors that occur when the system drive, hardware problems, caused by an error control signal
        2. Fragmented (fragmentation) is severe, unreasonable file IO, Raid sofeware, anti-virus programs cause more problems

     [Address]

        1. CHKDSK, Defrag conducted
        2. Antivirus, anti-spyware removal tool, Firewall, discontinue use backup program
        3. The latest version of Service Pack (SP), the latest version of drivers for various devices

Error code Stop 0 × 00000024 or NTFS_FILE_SYSTE

     Cause

        1. Nfts.sys has been corrupted, or deleted when the generation
        2. SCSI, ATA drive compatibility errors caused by faulty hardware

     [Address]

        1. SCSI if you are using, termination for failure, check cable
        2. Event viewer system log or SCSI related error checking FASTFAT
        3. Test hardware to provide hardware diagnostics
        4. DOS mode "CHKDSK / F" in Fairushisutemuerachekku after correction
        5. NF another drive to put a system error occurs, check disk

Error code Stop 0 × 00000027: RDR_FILE_SYSTEM

     Cause

        1. Error cause is not yet clear (--;)

     [Address]

        1. Kernel memory management for potential problems, and try to add memory exchange;

Error code Stop 0 × 0000002E or DATA_BUS_ERROR

     Cause

        1. Parity system error, memory module Level2 cache, video memory errors due to injury
        2. Caused by the virus

     [Address]

        1. If you install the wrong driver, deleting the driver or roll back
        2. For there are many cases of physical injury memory after to ensure that proper access and address data memory exchange if there is a problem
        3. Crack (--;) If you installed the software, remove software

Error code Stop 0 × 00000035: NO_MORE_IRP_STACK_LOCATIONS

     Cause

        1. Device drivers, or memory problems due to poor

     [Address]

        1. MSDN technical article references

Error code Stop 0 × 0000003F or NO_MORE_SYSTEM_PTES

     Cause

        1. As a major cause of PTEs (page table entries: IO system behavior unreasonable conduct) and PTEs (memory space information) is not enough, if an error occurs that is damaged or
        2. Installing the wrong driver
        3. Block of memory needed by the software (memory block) occurs when there is not enough

     [Address]

        1. Recently installed device drivers, or remove software
        2. Storage-related software, or device driver updates

Error code Stop 0 × 0000004E: PFN_LIST_CORRUPT

     Cause

        1. Memory management Page File Number list when the injury occurred
        2. Damage memory, bad memory descriptor lists have been omitted if you run the device driver

     [Address]

        1. Implementation of hardware diagnostics provided by Patsubenda
        2. Bakkuappuyutiriti, anti-virus software, Firewall, such as release of the software filter (OFF)
        3. Microsoft entered to check the Hardware Compatibility
        4. If this error occurs occasionally, then remove the memory test from the additional memory, usually caused by poor memory

Time to quit! It may still,
And therefore that those who have some knowledge of the short sentence, please refrain.
Basically, you can debug the blue screen does not explore,
Oh, we will introduce a blue screen debugging programs. I either!
So thank you again! (I am polite)

Cause a blue screen with error code (1)




Cause a blue screen with error code (1)


I have a busy delay in updating blog lately. If possible, I feel I want to update daily, TT

Anyway, this issue, Windows and one will use a blue screen would逢Tsu explains.

bluescreen

Immediately, I'll come right to the chase! !
Incidentally, the beginner may be a bit difficult, but, please think of studying.

Error code Stop 0 × 000000ed Unmountable Boot Volume

     Cause

        1. NTFS is an important system table is damaged disk

     [Address]

        1. OS disk (eg. Windows xp disk) after booting using the recovery mode (R) into
        2. And select keyboard OS, C: \> When the state "chkdsk / p" after the type, Enter
        3. After the check disk, "fixboot" after entering, "Y" and press reboot

Error code Stop 0 × 00000005: INVALID_PROCESS_ATTACH_ATTEMPT

     Cause

        1. Windows xp sp2, 2003 server, xp tablet pc 2005 edition in the anti-virus program or Firewall program because of features such as

     [Address]

        1. Windows xp sp2 in Windows xp 887742 What to do after downloading the update to install
        2. Antivirus program, such as application programs, or multimedia, to remove the software has a filter function, or update

Error code Stop 0 × 0000000A or IRQL_NOT_LESS_OR_EQUAL

     Cause

        1. Processor, memory management data IO (Input / Output), such as hardware control, IRQL (Interrupt Request Level) Interrupt errors occur if the request level is too high
        2. In order to access the kernel-Mode memory errors if you do not have permission to
        3. The error code generated from the above general hardware and software compatibility problems

     [Address]

        1. And therefore occur during the installation of drivers and firmware, and have trouble removing the driver, or Doraibarorubakku
        2. Windows xp If an error occurs when you update, the lack of compatible drivers, or conduct a virus check

Error code Stop 0 × 0000001A: MEMORY_MANAGEMENT

     Cause

        1.'s One hardware-related errors. If this error occurs when Windows during the installation, lack of memory, hard disk space or insufficient to confirm

     [Address]

        1. This error occurs because of lack of hard drive space, chkdsk.exe / autochk.exe generated by the Internet cach files, or temporary files (*. tmp files), delete the backup application program
        2. Older drivers, or hardware that caused this error. If not found, reinstall the drivers for it, CPU, memory, cache, VRAM, BIOS, there is no need to make sure it is firmly seated, and other chipsets

Error code Stop 0 × 0000001E or KMODE_EXCEPTION_NOT_HANDLED

     Cause

        1. Kernel of one error, 0 × A similar air
        2. Errors due to lack of memory
        3. Address the exclusion generally simple bag check (second parameter) is called a driver problem, and find or feature

     [Address]

        1. Remove the filter programs such as antivirus and multimedia programs, or update
        2.'s Win32k.sys remote control program if the file is damaged, that occur when you install a program or other remote control
        3. Safe-Mode is not accessible, Recovery Console using the troubleshooting
        4. If the error due to lack of system firmware compatibility, BIOS update to resolve

Error code Stop 0 × 00000019 or BAD_POOL_HEADER

     Cause

        1. Pool Header with abnormalities, the cause of the error was the last work with your PC

     [Address]

        1. When the boot "last successful configuration" select

Do not take a bath and so from now, the contents of the following ... after tomorrow, I'm sorry.
(-_-;)

Error code Stop 0 × 0000007F: UNEXPECTED_KERNEL_MODE_TRAPED
Error code Stop 0 × 00000079 or MISMATCHED_HAL
Error code Stop 0 × 00000080 NMI_HARDWARE_FAILURE
Error code Stop 0 × 0000009C: MACHINE_CHECK_EXCEPTION
Error code Stop 0 × 0000009F or DRIVER_POWER_STATE_FAILURE
Error code Stop 0 × 000000A5: ACPI_BIOS_ERROR
Error code Stop 0 × 000000B4: VIDEO_DRIVER_INIT_FAILURE
Error code Stop 0 × 000000BE: ATTEMPTED_WRITE_TO_READONLY_MEMORY
Error code Stop 0 × 000000C1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Error code Stop 0 × 000000C2: BAD_POOL_CALLER
Error code Stop 0 × 000000C4: DRIVER_VERIFIER_DETECTED_VIOLATION
Error code Stop 0 × 000000C5: DRIVER_CORRUPTED_EXPOOL
Error code Stop 0 × 000000C6: DRIVER_CAUGHT_MODIFYING_FREED_POOL
Error code Stop 0 × 000000C7: TIMER_OR_DPC_INVALID
Error code Stop 0 × 000000C9: DRIVER_VERIFIER_IOMANAGER_VIOLATION
Error code Stop 0 × 000000CB: DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
Error code Stop 0 × 000000CE: DRIVER_UNLOADED_WITHOUT_CANCELLING
Error code Stop 0 × 000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Error code Stop 0 × 000000D8: DRIVER_USED_EXCESSIVE_PTES
Error code Stop 0 × 000000E3: RESOURCE_NOT_OWNED
Error code Stop 0 × 000000EA: THREAD_STUCK_IN_DEVICE_DRIVER
Error code Stop 0 × 000000ED: UNMOUNTABLE_BOOT_VOLUME
Error code Stop 0 × 000000F2: HARDWARE_INTERRUPT_STORM
Error code Stop 0 × 000000F3: DISORDERLY_SHUTDOWN
Error code Stop 0 × 000000F4: CRITICAL_OBJECT_TERMINATION
Error code Stop 0 × 000000FC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
Error code Stop 0 × 1000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Error code Stop 0 × 1000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
Error code Stop 0xC000009A: STATUS_INSUFFICIENT_RESOURCES
Error code Stop 0xC0000135: UNABLE TO LOCATE DLL
Error code Stop 0xC0000142: DLL Initialization Failure
Error code Stop 0xC0000218: UNKNOWN_HARD_ERROR
Error code Stop 0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED
Error code Stop 0xC0000221: STATUS_IMAGE_CHECKSUM_MISMATCH
Error code Stop 0xC0000244
Error code Stop 0xC000026C
Error code Stop 0xDEADDEAD: MANUALLY_INITIATED_CRASH1